How To Install Miracle Box On Windows? Download Miracle Box Setup

how-to-install-miracle-box-on-windows
Chinese mobile phones are used in a large number all over the world. The problems which most people face while facing these phones are the drivers and operations like flashing etc. However, there are many devices which provide all in one solution for such problems and Miracle Box is one of them. Even though Miracle Box is a simple device, still, people face many problems while connecting it to their computers and also, they face problems during the driver installation for miracle box. Today, in this guide, I am going to give you a reliable miracle box software and also a quick and easy guide to install it on your devices. Let us now move to the quick installation guide for this device.

Note: Make sure that you install the exact version given in the link below.

Step by Step guide to installing Miracle Box on Windows?


Follow each and every step in this guide and you will be done within a matter of seconds.

1. Download the Miracle Box version which is given in the download link given below.
2. Connect your Miracle box by any of the cable options.
3. Extract the downloaded files and run Setup.exe.4. Start installing the software and once it is installed it will automatically open.
5. A window will pop-up which asks you to install an offer, reject it.
6. You will notice that Miracle Box program will open and then close after 1 second.
7. Go to the download files and extract the crack or patch files and copy them over to the folder where you have installed Miracle box software.
8. Now you are good to use this software.

I really hope that this article really helped you. Once again I am mentioning that download and install the exact software files from the link given below. Keep visiting our website for more free drivers and tech guides.



Download it here.

UFS Flashing Box+USB Driver Free Download For Windows

ufs-box-setup-and-usb-driver
In all the flashing box devices, UFS flashing box has been one of the most successful and demanded ones. If you are one of its users and came here looking for the free driver for your UFS Flashing Box then you are at the right spot. Today, I am going to give you the free UFS Flashing Box Driver and also going to tell you about the features of this amazing flashing device. This driver is absolutely free to download and can be downloaded and installed using any of the major version of Microsoft Windows including Windows XP, 7, 8.1, and 10. Let us now tell you about the different features of this amazing flashing device.


Features of UFS Flashing Box.


1. The new HWK uFs box works with the latest versions of HWK softwares by Saras Soft.
2. No more update needed.
3. Access to the official support site automatically without registering usernames and passwords.
4. Just plug in the box and use latest HWK softwares.
5. Making the box size smaller, compact and complete with UFS and HWK.
6. Automatic access to the support site, without having the hassle of registering usernames and passwords. Just run latest HWK software (LG_GSM, SAMs or SeDBx) and access support site.
7. To avoid problems of customers who buy original HWK. Since the UFS and HWK was already paired and updated, customer can directly check by plugging in the box and test using latest versions of HWK softwares. By having this box, theres is no way for the customers to be cheated to have either a clone UFS or clone HWK which is definitely a big problem.

Download the free UFS Flashing Box driver right now from the link given below. Don't forget to leave us your feedback about this article and you can also demand any free driver in the comments section below. For more free drivers and tech guides, keep visiting our website in the future.
Download (Box Setup)
Download (Driver)

How To Flash Nokia X2 Android RM-1013 (Full Flashing Guide)

how-to-flash-nokia-x2-android
Flashing is a process which is easy but people find it hard to do since many people are unable to find the firmware files, custom ROM, and many other files required to do it. But you don't need to worry anymore because you are at a place where you can easily download all these stock files needed for the flashing of your phone and then you can flash your phone. In this article, I have written about the flashing process of Nokia X2 rm-1013. This is an easy step by step guide to flash Nokia X2 rm-1013 right now from your computer. Also, links are given at the end of this article for the required files for the flashing process. So, let us now move with our step by step guide to flash Nokia X2 rm-1013.

Flashing Nokia X2 rm-1013.


Here is an easy step by step guide to flash Nokia X2 Rm-1013.

1- Create a folder Named RM-1013 and paste all downloaded flash files on this folder.
2- Install Nokia Care Suite 5.6.134.1513.
3- When asked for a password, enter www.gsmunlocker.net.
4- Copy and paste your created RM-1013 to C:\ProgramData\Nokia\Packages\Products.
5- If you don't have Products folder then create it and paste the Folder RM-1013 on it.
6- Now launch Nokia Product Support Tool.
7- Select your Phone RM-1013.
8- Go to Recovery and select you firmware start recovery, it will scan your download flash files and ask you to connect your phone in Boot loader Mode.
10- Now Power Off your phone. Remove Battery and insert it. Press Power Button + Volume Down For 5 seconds. Your phone will boot into the boot loader.

11- Now connect your phone to PC via USB Cable and Recovery will start.

So this was an easy step by step guide to flash Nokia X2 Rm-1013. Give us your feedback about the guide and ask any questions if you want. Keep visiting our website for more tech guides and more!

Full Guide About How To Flash HTC One M8

how-to-flash-htc-one-m8
If you have got a HTC One M8 and you want to flash with the custom ROM then you are at the right spot to learn. Today, I am going to give you a quick guide on the process of flashing your HTC One M8. First, we will talk about the necessary prerequisites for the flashing job and then it will be followed by a step by step guide on the process of flashing HTC One M8. So let's start.


Prerequisites before Flashing HTC One M8.

1. The 1st and most important thing is to backup all your important data because everything will be gone from your phone once the process is done.

2. The battery must have 80% backup and make sure that you have downloaded and installed the USB drivers for the phone.

3. Also, make sure that you have enabled the debugging mode of your phone.


Step by Step to Flash HTC One M8.

Let us now flash the phone once you are done with the prerequisites.

1. Connect your HTC One to your computer using a USB cable and copy the ROM and GApps zip files to your phone’s SD card root folder.
2. Disconnect the USB cord and power off your HTC device.
3. Boot your device in the Bootloader mode by pressing and holding the Volume Down and Power keys.
4. Follow the on screen instructions and select Bootloader > go to Recovery.
5. Once in recovery, perform wipe data task: from the CWM recovery menu, select wipe data / factory reset and confirm the process.
6. Also perform wipe cache partition followed by wipe dalvik cache (from Advanced).
7. From recovery main menu, select install zip from sdcard followed by choose zip from sdcard.
8. Locate the CM 12.1 Android 5.1.1 custom firmware file and confirm the flashing process.
9. Once the ROM is flashed successfully, repeat the above step, but select GApps package this time.
10. Return back to main recovery menu and reboot your HTC One M8 into the new custom ROM.

First boot takes a good 5 minutes so please be patient. You are now done with the flashing process of HTC One M8. Enjoy using your phone and keep visiting our website for more free tech guides and free drivers. 

How To Flash Samsung Galaxy S6 (Full Guide)

how-to-flash-samsung-galaxy-s6
Before, we talked about the flashing of Samsung Galaxy S3. Today, I am going to an easy guide on how to flash Samsung Galaxy S6. This will be just another simple guide to do the process just like the previous one. First, you need to know the benefits you can get by flashing your phone. This is a flashing guide for Samsung galaxy S6 and S6 edge which might help you to unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsung's stock firmware instead of custom ROM. This guide for all Samsung galaxy S6 and S6 edge variant (International, AT&T, Verizon, T-Mobile, Sprint, Canadian, etc).

Prerequisites to Flash Samsung Galaxy S6.


1. Official firmware file for the model number of your device, download it from SamMobile or Samsung-Updates.
2. The latest version of Odin3 tool.
3. Samsung Smart Switch or Samsung mobile USB driver.
4. Charged Samsung galaxy S6 or S6 edge (more than 70%).
5. USB cable and Windows PC.

Steps to Flash Samsung Galaxy S6


1. Download, install Samsung driver or Smart Switch.
2. Download, unzip firmware file and Odin.
3. Double-click odin3 tool, click AP and navigate to the *.tar or *.tar.md5 firmware file.
4. Put your phone into download mode (Vol Down+Home+Power) then Vol Up.
5. Connect your device to the computer and wait until you get a sign in ID:COM section and "Added" in the message box.
6. Don't change Odin's options.
7. Click Start and wait few minutes until you see "PASS!" in Odin.

8. If your phone stuck in boot loop, reboot your device into recovery mode then choose factory reset.

After following these simple steps, your Samsung Galaxy S6 will be flashed. Ask anything or leave us your feedback in the comments section. Keep visiting our website for more tech guides and enjoy!

How To Flash Samsung Galaxy S3 i9300?

how-to-flash-samsung-galaxy-s3-i9300
If you are still using one of the most beautiful smartphones from the Samsung's S series which is S3 and you are looking to flash it then you are at the right spot. Today, I am going to give you a quick guide with the help of which you can easily flash your Samsung Galaxy S3. So, let us move us with our task of flashing Samsung Galaxy S3 i9300.

Here are few prerequisites which you got to do before moving on to flash Samsung Galaxy S3 i9300.

1. Make sure that you have downloaded the USB drivers for your phone.
2. Don't forget to make a back up of any important data that is present on your phone because otherwise, you will lose it.
3. Make sure that you have a battery backup of more than 70% because this process could take a while.
4. USB debugging must be enabled from the settings in your phone.

Once all these things are taken care of, we can move with the flashing process.

Flashing Samsung Galaxy S3 i9300.

Here is a step by step guide to Flash Samsung Galaxy S3 i9300.

1. Extract both the Odin files and the firmware zip files.
2. Now turn your phone off and start it in the boot mode by pressing the power, home, and volume down button together.
3. Odin will automatically detect your device once you have connected it with the help of a USB cable. Now select the following files in the Odin. Make sure that the following order is being followed.
4. Click on AP / PDA and select file with CODE in its name.
5. Click on CP/Phone and select file with MODEM in its name – ignore if you didn’t get any such file.
6. Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
8. Click on PIT and select the .pit file – ignore if you didn’t get any such file.
9. After the above steps, mark F.Rest Time and Auto-Reboot. In case you have select the pit file, check re-partition as well.
10. Now start the update and once it is done, reboot your phone and disconnect the cable.

So, this was an easy step by step guide to Flash Samsung Galaxy S3 i9300. If you liked this article then don't forget to leave us your feedback and ask any question that you want to ask as well. Keep visiting our website for more tech guides and free drivers.

How To Flash Nokia 108, 105 RM-944 With HWK?

how-to-flash-nokia-108-rm-944-with-hwk
Hey, guys, if you have been looking for a guide to learn flashing your Nokia devices including Nokia 108, 105, and others in RM model then you have finally found the right place. There are a lot of guides on the internet which tell you how to do the flashing process but at the end, you are left unsatisfied. Today, I am going to give you the best guide to flash your Nokia 108 with HWC DCTXBB5 tools for the purpose. Make sure that you download the flash files from here and then you can follow the process in this article. This will be one of the easiest and 100% method for flashing your device so don't worry and follow steps in the guide below.

Today, we are going to show you the flashing of Nokia 108 with HWC using DBTXBB5 tools used for flashing your Nokia devices with the latest firmware. This is an easy step by step guide to do the process so make sure that you follow each and every step carefully and you will be done within a matter of seconds. Following are the steps in the flashing process of Nokia 108 with HWC DBTXBB5 software.

Flashing Nokia 108 with HWK.

1. Connect your device with the help of a cable and open the software.
2. Click on the connect icon in the software on the main menu.
3. One your device is connected, select the DCTXBB5 and select the RM model according to your phone which in this case, is of Nokia 108.
4. Now choose the 4 flash files from the location where you have downloaded them.
5. Now check the files by clicking Check in the main menu.
6. Once the files are checked, go to write flash in the main menu and start waiting till the software is done with the process of flashing your phone.

So, this was an easy guide to flash your Nokia 108. Was this article helpful? If yes, then don't forget to leave us your feedback in the comments section below. Also, keep visiting our forum for more free guides and flashing tools.